Results: 253

This search application does not cover all products.
If you are not satisfied with your search results, please contact us.

Search other product categories using the same keywords >>
PLASMA WELDING / CUTTING, GOUGING

Image	Type of Product	Brand Name	JIS	AWS	Characteristics
	Flux Cored Wires	SF-3AM		AWS A5.29 E81T1-Ni1M-H4☆	SF-3AM is a rutile type seamless flux cored arc welding wire with Ar+20%CO2 shielding gas. It assures excellent impact toughness at low temperatures down to -40°C. It has also good usability in all position welding. Moreover, due to its seamless surface, it provides various advantages better than conventional open-seam flux cored wires.
	Flux Cored Wires	SF-3M		AWS A5.20 E71T-9C-JH4☆	SF-3M is a rutile type seamless flux cored arc welding wire to be used with CO2 shield gas and designed for shipbuilding and offshore structure welding. Weld metal shows excellent toughness in low temperature range down to -40°C. Diffusible hydrogen content is as low as solid wire s and crack resistance is excellent. Weldability in all position are excellent.
	Flux Cored Wires	SX-26	JIS Z 3313 T49J0T15-0CA-UH5	AWS A5.18 E70C-3C-H4☆	SX-26 is seamless flux cored arc welding wire filled mainly with metallic powder and is used with CO2 shield gas. The arc is softer and the fume is less and the weld metal in holizontal position (2G) is bringed better than solid wires with CO2. And penetration is gave as depth as solid wires with CO2. Continuous multi-layer welding like solid wires is possible due to the small amount of slag. The wire is fed straight and easily since it has no seam and, therefore, is suitable for high current and high efficiency automatic welding including robots.
	Flux Cored Wires	SX-55	JIS Z 3313 T550T15-0CA-UH5	AWS A5.28 E80C-G-H4☆	SX-55 is seamless flux cored arc welding wire filled mainly with metallic powder and is used with CO2 shield gas. The arc is softer and the fume is less and the weld metal in holizontal position (2G) is bringed better than solid wires with CO2. And the penetration is gave as depth as solid wires with CO2. The continuous multi-layer welding like solid wires is possible due to the small amount of slag. The wire is fed straight and easily since it has no seam and, therefore, is suitable for high current and high efficiency automatic welding including robots. In case of welding for 490MPa high tensile strength steel, it can be applyed a administrative limited welding conditions (H/I: 40kJ/cm-Inter-Pass/Temp.: 350°C) on JASS6 of Arcitectual institute of Japan.
	Flux Cored Wires	SM-1	JIS Z 3313 T49J0T15-0CA-G-UH5	AWS A5.18 E70C-GC☆	SM-1 is seamless flux cored arc welding wire filled mainly with metallic powder and is used with CO2 shield gas. The arc is softer and the fume is less than solid wires with CO2 and it can be applied high welding speed. The continuous multi-layer welding like solid wires is possible due to the small amount of slag. The wire is fed straight and easily since it has no seam and, therefore, is suitable for high current and high efficiency automatic welding including robots.
	Flux Cored Wires	SM-1S	JIS Z 3313 T49J0T1-0CA-UH5	AWS A5.20 E70T-1C-H4☆	SM-1S is a less slag quantity type seamless flux cored wire filled mainly with metallic powder. The arc is more stable than CO2 solid wires,the spatters are few and the bead shape is excellent in flat butt and horizontal fillet welding.
	Flux Cored Wires	SM-1F	JIS Z 3313 T49J0T1-0CA-UH5	AWS A5.20 E70T-1C-H4☆	SM-1F is a rutile type seamless flux cored arc welding wire filled mainly with metallic powder to be used with CO2 shield gas. The weld metal shows excellent resistance to pitting in the welding of steel plates coated with inorganic zinc primer.
	Flux Cored Wires	SF-60	JIS Z 3313 T59J1T1-1CA-N2M1-UH5	AWS A5.29 E81T1-GC-H4☆	SF-60 is a rutile type seamless flux cored arc welding wires to be used with 100%CO2 shield gas and designed for bridges, machineries and structures welding. The weld metal shows excellent toughness in low temperature range at down to -5°C. The diffusible hydrogen content is as low as solid wires and the crack resistance is excellent. The Weldabilities in all position are excellent.
	Flux Cored Wires	SF-60A	JIS Z 3313 T59J1T1-1MA-N2M1-UH5	AWS A5.29 E81T1-GM-H4☆	SF-60A is a rutile type seamless flux cored arc welding wires to be used with Ar+20%CO2(SF-60A) shield gas and designed for bridges, machineries and structures welding. The weld metal shows excellent toughness in low temperature range at down to -5°C. The diffusible hydrogen content is as low as solid wire and crack resistance is excellent. The weldability in all positions are excellent.
	Flux Cored Wires	SF-60T	JIS Z 3313 T59J1T1-1CA-G-UH5	AWS A5.29 E81T1-GC-H4☆	SF-60T is a rutile-type seamless flux cored wire, designed for 590 MPa class high-tensile steel. The components of deposit metal are based on Ni/Mo, which provides enough strength even in welding of thin plates and intermediate plates. The hydrogen content is low to the same extent as solid wire, and excellenint crack resistance.