Results: 253

This search application does not cover all products.
If you are not satisfied with your search results, please contact us.

Search other product categories using the same keywords >>
PLASMA WELDING / CUTTING, GOUGING

Image	Type of Product	Brand Name	JIS	AWS	Characteristics
	Flux Cored Wires	EG-60	JIS Z 3319 YFEG-32C☆		FCAW for electrogas welding to be used with CO2 gas shield for 590MPa high tensile strength steel.
	Solid wires	YM-22Z			YM-22Z is a gas metal arc welding wire to be used with Ar+CO2 shield gas. The blowholes and the spatters are few and bead is sound in one pass fillet welding of alloified molten galvannealed steel plates of 45 to 60g/m2 galvanization level. Also, it can be apllied high speed welding of more than 100cm/min. The best effect is obtained in the conbination with an inverter controlled pulsed power source.
	Solid wires	YM-24S	JIS Z 3312 G43A2M0		YM-24S is a gas metal arc welding wire to be used with Ar+CO2 shield gas. The spatters are extremely few and the bead is beautiful especially in high speed welding (80~150cm/min) of thin plates (2.0~3.2mm) in conbination with a power source of high pulse frequency.
	Solid wires	YM-24T	JIS Z 3312 YGW16		YM-24T is a gas metal arc welding wire to be used with Ar+CO2 shield gas and has favorable gap-proof performance on high-speed welding of thin steel sheets.The weldability, the arc is stable, the spatters are few and the bead is beautiful. The best effect is obtained in conbination with inverter controlled pulsed.
	Solid wires	YM-25	JIS Z 3312 YGW16	AWS A5.18 ER70S-3☆	YM-25 is a gas metal arc welding wire to be used with Ar+CO2 shield gas. It is suitable for all position welding of thin plates. The arc is stable, the spatters are few and the bead is beautiful in dip transfer welding.
	Solid wires	YM-25S	JIS Z 3312 YGW16	AWS A5.18 ER70S-3☆	YM-25S is a gas metal arc welding wire to be used with Ar+CO2 shield gas and is suitable for all position welding of thin plates. The arc is stable, the spatters are few and the bead is beautiful in dip transfer welding.
	Solid wires	YM-26	JIS Z 3312 YGW11	AWS A5.18 ER70S-G☆	YM-26 is a gas metal arc welding wire to be used with CO2 shield gas. The arc is stable, the spatters are few and weldability is excellent even in high welding current range. It is obtained high efficiency since the deposition rate is high and the penetration is deep.
	Solid wires	YM-28	JIS Z 3312 YGW12	AWS A5.18 ER70S-G☆	YM-28 is a gas metal arc welding wire to be used with CO2 shield gas. The arc is stable, the spatters are few and the weldability is excellent even with low current under 200A. The welding of thin plates in all position. especially in vertical downward position, is easy. Also, it shows better weldability in high speed welding of thin plates with currents of less than 300A than wires of other types. Also with Ar+CO2 mixture gas, the arc is stable, the spatters are few and the bead is beautiful in a wide welding current range.
	Solid wires	YM-28S	JIS Z 3312 YGW15	AWS A5.18 ER70S-G☆	YM-28S is a gas metal arc welding wire to be used with Ar+CO2 shield gas. The arc is stable, the spatters are few, the weldability is satisfactory and the beautiful and the flat bead is obtained in high current spray transfer welding. The welding in vertical position is easy and the weld metal shows excellent toughness. It is also suitable for dip transfer welding with low current. It assures excellent weldability and properties of weld metal in pulsed arc welding.
	Solid wires	YM-28Z	JIS Z 3312 G49A0C0		YM-28Z is a gas metal arc welding wire to be used with CO2 shield gas. In the welding of molten galvanized steel plates of 270g/m2 (Z27) galvanization level, the blowholes and the spatters are less and the bead is sounder than conventional YGW 14 type wires. It is also used for joining steel plates without galvanization.